Bought Earlier this year
Still under SCM warranty until April 2026*

1-phase / Units (2 mm radius tools): End trim, Top/bottom trim

Technical data
• 1-phase / Units (2 mm radius tools): End trim, Top/bottom trim

• Work table dimensions 1950 x 180 mm
• Min. ÷ max. thickness of rolled edges 0,4 ÷ 2 mm
• Max. thickness of edges in strips 5 mm
• Min. ÷ max. panel height 12 ÷ 50 mm
• Min. panel length/width 180/65 mm
• Feed speed 6 m/min

Exhaust outlets diameter:
no. 1 base outlets
no. 1 glue pot outlet 120 mm (4.69”) 60 mm (2.31”)

Installation requirements

Nominal extraction air consumption 1017 m3/h ( 590 CFM)
Air exhaust speed 20 m/s (66 ft/s)
Pneumatic operating pressure 6.5 bar
Electrical requirements
230 V – 60 Hz – single phase – 22 A