VORTEX is the first cyclone filter entirely made in Italy.
The cyclone is an efficient separation system for dust, normally used for large systems. VORTEX is an innovative product because it integrates the cyclone separator in a compact machine.
Finally you will avoid all the extracted dust ending up in the filter module, quickly clogging it and reducing extraction. With your VORTEX filter, you will not lose power even after days of intense work.
Made in Italy All Our motors and machines are manufactured entirely in Italy, with top quality Italian or European components and therefore distinguished by high reliability.
Technical Data
3hp
220v, 3 phase 60Hz
UL Certified
1650 CFM
Dimensions: 55″x31″ x 87″
Pressure: 2,600 Pascal
More Info
How it Works?
The dusty air enters the VORTEX through the extraction inlet of the cyclone.
Thanks to the cylindrical and then conical shape, the air flow is forced into downward spiral motion.
As a result of the centrifugal force, the particles separate from the gas flow that contains them and are dragged by the force of gravity towards the lower part of the filter where they are collected.
The finer particles that remain in suspension are extracted and through the inner cylinder, pushed by the fan into the filter body and retained and collected here.
The percentage of dust captured by the cyclone is much greater than that ending up in the final container, in a ratio that can reach up to 99% of the total, depending on the grain size and physical characteristics of the dust or chip extracted.
